Rochester
Recom
Electronics Component

Ametherm at APEC 2018

Ametherm_PANR_103395_342

At APEC 2018, Ametherm will be showcasing a wide range of its leading NTC and PTC inrush current limiters for reliable circuit protection and NTC thermistor sensors for high-accuracy temperature compensation and measurement. Made in the U.S.A., Ametherm’s products are recognized by Underwriters Laboratories (UL) and the Canadian Standards Association (CSA International) for ensured safety, and many are RoHS-2-certified. Ametherm products are available directly from Ametherm or through distributors such as Digi-Key and Mouser.

Products on Display at APEC 2018

MS35 Series of Rugged NTC Thermistors
Optimized for applications such as wind turbines, solar power inverters, battery chargers and DC/DC converters, the MS35 series is designed to withstand high input energy from 500 J to 750 J and steady-state current from 10 A to 50 A. These devices offer resistance at 25 °C from 0.5 Ω to 20 Ω and thermal time constants from 65 s to 240 s. Featuring a diameter of 38 mm and thickness less than 10 mm, these thermistors do the same job as a power resistor and relay, yet in a smaller single-part alternative, saving valuable circuit board space.

Link to detailed MS35 series info: https://www.ametherm.com/inrush-current/ms35-inrush-current-limiters

Link to MS35 product photo: http://www.redpinesgroup.com/Ametherm/Ametherm_MS35.jpg

MM35-DIN Series of High-Power NTC Thermistors
The MM35-DIN series is designed to withstand high input energy of 1200 J and steady-state current from 50.0 A to 80.0 A at 680 V. Offered in DIN-rail-mountable packages, these inrush current limiters are optimized for high-power industrial and green energy applications, including variable frequency motor drives, wind turbines, large inverters, single- and three-phase motors and transformers. The MM35-DIN series features resistance at 25 °C from 0.2 Ω to 1.5 Ω, with maximum power of 38.4 W.

Link to detailed MM35-DIN series info: https://www.ametherm.com/inrush-current/mm35-din-series-high-power-inrush-current-applications/

Link to MM35-DIN product photo: http://www.redpinesgroup.com/Ametherm/Ametherm_MM35.jpg

PANR 103395-342 NTC Temperature Probe
The PANR 103395-342 features a ring lug for easy and secure mounting to battery terminals. This NTC thermistor temperature sensor is extremely accurate and experiences minimal drift from its initial electrical values to provide a high-stability replacement for thermocouples. The device features a high-dielectric withstand voltage, resistance at 25 °C of 10 kΩ, beta of 3950° K and dissipation constant of 8 mW/°C.

Link to detailed PANR 103395-342 info: https://www.ametherm.com/thermistor/battery-terminal-temperature-sensor-lithium-ion

Link to PANR 103395-342 product photo: http://www.redpinesgroup.com/Ametherm/Ametherm_PANR_103395_342.jpg

Download Techmezine Android app on google play store: Download Now

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

To Top