ROHM has added the new CMOS Operational Amplifier (op amp) series “TLRx728” and “BD728x” to its lineup. These are suitable for a wide range of applications including automotive, industrial, and consumer systems.A broad lineup also makes product selection easier.
In recent years,demand for high-accuracy op amps has been rapidly increasing as automotive and industrial systems become more sophisticated, demanding faster speed, better precision, and higher efficiency.In applications requiring amplification of sensor outputs, minimizing signal error and delay is essential. To meet these requirements, a well-balanced set of key characteristics is needed, including Input Offset Voltage, Noise, and Slew Rate.
These new products are high-performance op amps that offer a low input offset voltage, low noise, and high slew rate. TLRx728 features an input offset voltage of 150 μV(typ.), while the BD728x offers 1.6 mV (typ.). Both series have a noise voltage density of 12 nV/√Hz at 1kHz and a slew rate of 10 V/μs. They are therefore suitable for a wide range of precision applications, including sensor signal processing, current detection circuits, motor driver control, and power supply monitoring systems. Both series are designed to balance versatility and high performance rather than being limited to specific applications.
Rail-to-Rail input/output capability allows maximum utilization of the power supply voltage range, ensuring a wide dynamic range.
Furthermore, in addition to 1channel, 2channels, and 4channels configurations, a diverse range of packages is available, enabling optimal product selection based on application and board size.
The new products are being released simultaneouslyexcept for certain part numbers (Sample Price: 1-channel: $2.0, 2-channels: $2.8, 4-channels: $4.0 per unit, excluding tax). For sales information, please refer to the lineup table. They are also available for purchase online through online distributors such asDigiKey,Mouser and Farnell.
| Series | Part No. | Data Sheet | ch | Power Supply | Input Offset Voltage (Max.) | Noise Voltage Density (Typ.) | Slew Rate (Typ.) | Supply Current (Typ.) | Shutdown | AEC-Q100 | Package |
|---|---|---|---|---|---|---|---|---|---|---|---|
| TLRx728 series |
☆ TLR728YG-C | – | 1 | 2.5V to 5.5V |
150µV @25°C
550µV @All Temp Drift 5.0µV/°C |
12nV/√Hz @1kHz30nV/√Hz @10kHz |
10V/µs | 1.70mA | – | ✓ | SSOP5 |
 TLR728G-LB |
 |
– | – | ||||||||
| ☆ TLR2728YFVM-C | – | 2 | 3.40mA | – | ✓ | MSOP8 | |||||
| TLR2728YFJ-C |
|
– | ✓ | SOP-J8 | |||||||
| TLR3728GUL |
|
✓ | – | VCSP50L1 | |||||||
| ☆ TLR4728YFV-C | – | 4 | 6.80mA | – | ✓ | SOP14 | |||||
| BD728x series |
BD7281YG-C |
|
1 | 2.5V to 5.5V |
1.6mV @25°C
2.0mV @All Temp Drift 4.0µV/°C |
12nV/√Hz @1kHz30nV/√Hz @10kHz |
10V/µs | 1.70mA | – | ✓ | SSOP5 |
| BD7281G-LB |
|
– | – | ||||||||
| BD7280YG-C |
|
✓ | ✓ | SSOP6 | |||||||
| BD7282YFVM-C |
|
2 | 3.40mA | – | ✓ | MSOP8 | |||||
| BD7282FVM-LB |
|
– | – | ||||||||
| BD7282YFJ-C |
|
– | ✓ | SOP-J8 | |||||||
| BD7282FJ-LB |
|
– | – | ||||||||
| BD7284YFV-C |
|
4 | 6.80mA | – | ✓ | SSOP-B14 | |||||
| BD7284FV-LB |
|
– | – | ||||||||
| BD7284F-LB |
|
– | – | SOP14 | |||||||
| BD7285FV-LB |
|
✓ | – | SSOP-B16 |
☆ : Coming soon
Application Examples
Automotive equipment, industrial equipment, and consumer electronics.
Example use case: Sensor signal processing, current detection circuits, motor driver control, power supply monitoring systems.
Terminology
Input Offset Voltage
The voltage that must be applied between the op amp’s two input terminals to force the output to zero volts.
Slew Rate
A performance metric indicating how rapidly an op amp’s output voltage can change while operating in linear region.
Noise Voltage Density
Also called noise spectral density. This is noise power per square root of bandwidth of 1 Hz. The total noise power within a bandwidth of B Hz is Noise Voltage Density x √B.
